|
09-04-2006, 03:46 PM
|
||||
|
||||
|
copper fouling
Has anyone used 10% ammonia for cleaning bore?? I tried some Barnes bullets and my lands are coated with copper. Accubore and Hopes don't seem to touch it. Hasn't affected accuracy but I'd like to get rid of it..
|
|
09-04-2006, 05:07 PM
|
||||
|
||||
|
My homemade copper cleaner is about 10%, I wouldn't leave it in the bore for a long period but it works great to remove the copper. I then run patches of hoppes through to get rid of all the ammonia and provide rust protection.
|
|
09-04-2006, 09:19 PM
|
||||
|
||||
|
get some WipeOut
Ive used CR10 & Bore Shine, and this stuff blows it out of the water
__________________
"If you ever go into the bush, there are grizzly bears lurking behind just about every bush, waiting to pounce, so you need a powerful gun, with huge bullets" - Gatehouse ~ 2004
|
|
09-06-2006, 09:43 PM
|
||||
|
||||
|
thanks
Local gunsmith had some wipe out. I've got a clean bore now but did the blue stuff ever come out the end of the barrel the first few treatments. Was a little messy but it really works like a hot damn.. Thanks 260...
|
|
09-06-2006, 10:21 PM
|
||||
|
||||
|
trick is learning that you dont need much in the bore for it to fill it up and work
__________________
"If you ever go into the bush, there are grizzly bears lurking behind just about every bush, waiting to pounce, so you need a powerful gun, with huge bullets" - Gatehouse ~ 2004
|
|
09-08-2006, 02:12 PM
|
|||
|
|||
|
I just use plain household ammonia until all the blue stuff is gone then chase it down with some Ed's Red.
It's as cheap as it comes.
__________________
I love the sound of a good connection!!!! 
|
Linear Mode
