|
04-24-2009, 05:13 PM
|
|||
|
|||
|
Lee Neck Sizing Die
Just wondering what any of you think of the Collet dies. I usually buy Hornady dies but just bought collet dies for my 7mm Mag. I really like them and just curious what other feedback is. I like the fact that it seems to be less stretching of the case neck lenght without the use of any lube on the inside of the case.
__________________
Go big or go home 
|
|
04-24-2009, 07:20 PM
|
||||
|
||||
|
While a lot of people swear by them I personally don't like them. I don't think the aluminum cap piece was well engineered and the one I had stripped out the threads after sizing a half-dozen cases.
__________________
“Beware the man with one rifle. He may not have enough interest in it to be competent.” Mike Venturino CSSA Member
|
|
04-25-2009, 06:34 PM
|
||||
|
||||
|
I have a lee neck sizing die for my bolt action 30/30 and for 303
Havent had ant problems with them to date
__________________
Promoting the sport of Archery and Hunting. IBEP and NCCP Certification Custom Knife Maker Blacktail Custom Designs Quote-----"Life's tough....It's even tougher if you're stupid".........John Wayne Quote-----"It is far better to be alone than in bad company".......George Washington
|
|
05-23-2009, 08:02 PM
|
|||
|
|||
|
I use them as: a competion die for my 308,neck sizing die for the magnums I can get it for,neck sizing die for my
303,and of course, the lazy man's answer to brass prep. I have used them at least a couple of thousand times and have had two problems. One a used die didn't open and the cap stripped when it got jammed , they are designed to give. They sent another cap for free.
|
Linear Mode
