|
07-27-2007, 02:18 PM
|
|||
|
|||
|
Ranger Shotgun
Hi
I have a single barrel Ranger shotgun, full choke with a 30" barrell. After doing some research I have found out it was sold through Sears in the 20's & 30's My problem is I'm not sure what it is chambered for? ther are no stampings other than 12 guage, full choke and a serial number #46014, If anyone has a spec for this I'd very grateful thanks Keith 
|
|
07-27-2007, 02:50 PM
|
||||
|
||||
|
It should be chambered for 2 3/4" shells but dependant on age- these were made from 1915 to 1930 - it could possibly be chambered for the old 2 9/16" cartridge. A trip to the gunsmith to measure the chamber would be in order before shooting it.
BTW, your shotgun was built by Savage/Stevens and were made under Browning's patent
__________________
“Beware the man with one rifle. He may not have enough interest in it to be competent.” Mike Venturino CSSA Member Last edited by Cariboo; 07-27-2007 at 03:02 PM.
|
|
07-27-2007, 10:41 PM
|
|||
|
|||
|
thanks
I kind of suspected that for chambering but I think I'll take into a gunsmith to confirm. I might also look at the Savage/Stevens website to see if I can find anything. Again thanks K
|
Linear Mode
